Dyson Airblade Wash+Dry (WD05-HV) Tall, 208-240V (High Volt)
|Wash and dry your hands at one place without dripping water and creating a potential slipping hazard.|
With Airblade™ hand drying technology in a faucet, you can dry your hands right at the sink! This beautiful and futuristic solution will leave a lasting impression with all who use it. And the practical aspects of the TAP make this a compelling investment for any business as well. Installing a Dyson Airblade TAP means significantly reduced operating expenses. No more cases of paper towels to buy and reduced janitorial costs (elimination of frequent service trips to the bathroom mopping up drips from wet hands across the floor and used paper towels thrown on the floor or clogging toilets).
And don't forget the hygienic benefits of a HEPA filtration system. All Dyson Airblades have a 3 stage HEPA filter built in. A grill to capture larger debris, a fleece layer to capture fluff and fibers, and a pleated HEPA media to capture particles as small as 0.3 microns.
Fastest Dry Times. 12-15 Seconds.
Proven hygienic. Dyson Airblade hand dryers are the only ones to obtain NSF P335 certification.
Dyson extended life digital motor V4 (brushless DC).
Low running costs. Airblades cost up to 69% less to run than other hand dryers and up to 97% less than paper towels.
The Dyson Airblade Wash+Dry hand dryer has a lower environmental impact than other hand drying methods. It produces just 4.0g of CO2 per dry - up to 79% less than some other hand dryers and up to 76% less than recycled paper towels.
5 Year Dyson limited manufacturer's warranty.
|Reported Dry Time:||10-12 Seconds|
|Mount:||Deck Mount (Semi-Recessed)|
|Cover:||Stainless Steel (Brushed Finish)|
|Nozzle:||AIR: 2 aperture slots (one along the bottom edge of the left and right "arms"|
WATER: 1 port located at the end of the center stalk.
|Activation:||Automatic (infra-red sensor) Touch-Free|
|Power:||220-240V, 60Hz, 1000 Watts (4.5A @ 220V)|
|Motor:||Dyson digital motor V4 (brushless DC)|
|Fan:||Ultra high speed composite blades|
|Reported Sound Level:||81 dB(A)|
|Heating Element:||None (air warmed by motor heat)|
|Filter:||3 Stage pleated HEPA filter cartridge|
|Product Dimensions:||(Above Counter) 11-15/16" Wide x 12-3/16" Tall x 11-1/4" Deep|
|Product Weight:||10.1 lbs.|
|Shipping Dimensions:||17" Length x 11-5/16" Width x 10-7/8" Height|
|Shipping Weight:||16.3 lbs.|
|UPC / GTIN:||885609014081|
|Manufacturer's Part No.:||WD05-HV (247910-01)|
|Country of Manufacture:||Malaysia|