• Home
  • ASI 10-20365 Stainless Steel, Wall/Surface Mount, Automatic FOAMING Soap Dispenser, Vertical

ASI 10-20365 Stainless Steel, Wall/Surface Mount, Automatic FOAMING Soap Dispenser, Vertical

(0) No Reviews yet
$169.82
SKU: 10-20365

IN STOCK

8 available for immediate shipment

A foam drop is dispensed out of the nozzle on unit bottom each time its sensor is activated. Powered by 4 AA-size batteries (not included).

Soap Requirements: Proper usage of this dispenser requires, that only soap within the following range for viscosity and pH may be used.

   pH Range: 5.5 ~ 8.5
   Viscosity Range (mPa·s or cP): 5 – 1500

  • Capacity: 33.8 oz. (1000 ml) of liquid foaming soaps within a wide range of viscosity.


Mount: Wall / Surface   
Operation: Automatic (Hands-Free) Sensor Activated   
Cover Material: Stainless Steel   
Power: Four (4) AA size (1.5V) Batteries (not included)   
Soap Type: Foaming soaps or foaming sanitizer having a pH in range 7 ± 1.5 and viscosity in range 1-50 cP (mPa•s)   
Capacity: 34 oz.   
Dispense Amount: Single shot foam volume ranging from 1-/4 oz to 1/3 oz [7 ml ~ 9 ml] using 0.02 oz ~ 0.03 oz [0.7 ml ~ 0.9 ml] liquid   
Overall Dimensions: 5-1/2" Wide x 10-7/8" Tall x 4" Deep   
Net Weight: 2.2 lbs.   
Shipping Dimensions: 12" Length x 6" Width x 5" Height   
Shipping Weight: 2.5 lbs.   
Warranty: Warranted to be free from initial defects in material and workmanship for a period of one (1) year from date of invoice.   
UPC / GTIN: Not published   
Country of Manufacture: Not published
Buy American Act compliant   
Comments: Door has lock to provide security and vandal resistance after each soap refill and battery change service interval.

Opening cover activates pump shut-off to prevent spills while servicing soap or batteries.   

Architectural Specifications:

Automatic Foam Soap Dispenser shall hold 34 oz (1 L) of liquid foaming soaps or foaming hand sanitizer having a pH in range 7 ± 1.5 and viscosity in range 1-50 cP (mPa•s) and dispense in cycles of single shot foam volume ranging from 1-/4 oz to 1/3 oz [7 ml ~ 9 ml] using 0.02 oz ~ 0.03 oz [0.7 ml ~ 0.9 ml] liquid for each shot. Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry powered by four (4) AA size 1.5 V batteries (supplied by others) in a concealed compartment and locked inside unit housing. Unit shall be fabricated of 22 gage type 304 stainless steel alloy 18-8 (.031" [0,8] thick) with a uniform satin finish over all exposed surfaces. Cover shall have lock keyed alike with other ASI washroom accessories. Unit shall have an LED to indicate function and operational condition on front face. Internal tank shall be translucent to show quantity of soap remaining at any time when cover is opened and shall be easily removed to facilitate filling and external storage of full tanks. Unit shall mount to wall on concealed base plate with screws secured under locked cover. Mounting Template (MT) and Owner’s Manual (OM) shall be provided with unit in each carton.


Ratings & Reviews

No reviews available

Be the first to Write a Review